List of lens holders

This post is also available in: ja日本語 (Japanese)

Fixed lens holder
Installation type fixed lens holder
Slide type lens holder
Cylindrical lens holder
Adapter mount
Centering lens holder
Three-axis adjustable lens holder
5 axis adjusted lens holder
Cross holder Dedicated adapter [Objective lens / CF / pin hole etc]
Objective lens holder

Fixed type lens holder

■The fixed lens holder is used to fix circular elements such as lens, mirror, filter, etc. ■Fix the element with Delrin ring · screwing. ■In the folder, a pole of φ12 mm L = 60 mm is standard equipped. ■Products range in catalogs L = 20 ~ 120 mm and also supports pole length change. ■On the opposite side of the standard pole mounting surface, a tap that can be installed with an inch pole is also equipped. ■We will also support production in special sizes. “Please contact us”
Model Element diameterφmm Effective diameterφmm Element thicknessMax mm List Price
LH-5-T2 5 4 5.7 ¥3,600
LH-6-T2 6 5 5.7 ¥3,600
LH-9-T2 9 6 6 ¥3,600
LH-10-T2 10 7 6 ¥3,400
LH-12-T2 12 9 10 ¥3,400
LH-12.7-T2 12.7 9.5 10 ¥3,400
LH-15-T2 15 12 10 ¥3,400
LH-18-T2 18 15 12 ¥3,400
LH-20-T2 20 17 12 ¥3,400
LH-25-T2 25 22 10 ¥3,600
LH-25.4-T2 25.4 22 10 ¥3,600
LH-25.4S-T2 25.4 22 13 ¥3,800
LH-30-T2 30 26 6 ¥3,800
LH-30S-T2 30 26 12 ¥3,800
LH-38.1-T2 38.1 34 12 ¥4,000
LH-40-T2 40 36 12 ¥4,000
LH-50-T2 50 46 12 ¥4,700
LH-50S-T2 50 46 18 ¥4,700
LH-50.8-T2 50.8 46 12 ¥4,700
LH-60-T2 60 56 15 ¥5,500
LH-76.2S-T2 76.2 71 20 ¥9,500

Installation type fixed lens holder

■The fixed lens holder is used to fix circular elements such as lens, mirror, filter, etc. ■Fix the optical element with Delrin ring · screwing. ■It can be fixed at a fixed height of 30 mm optical axis center.
Model number  Element diameter Effective diameter Device thickness Price 
φA mm φB mm Max D mm
LH30-10 10 7 6 ¥10,000
LH30-12.7 12.7 9.5 10 ¥10,000
LH30-15 15 12 10 ¥10,000
LH30-20 20 17 12 ¥10,000
LH30-25 25 22 10 ¥10,000
LH30-25.4 25.4 22 10 ¥10,000
LH30-30 30 26 12 ¥10,000

Slide type lens holder

■Slide type lens holder can fix circular elements such as lens and mirror. ■To detach and attach the element, release the left and right clamps of the upper slide and fix the slide adjustment according to the element size. Final fixation with upper element clamp after slide adjustment. ■For standard products, φ12 L = 60 stainless steel pole is equipped. ■We also support changes in pole length in the range of cataloged articles (L = 20 to 120).
Model number Element diameter 【mm】 Cover thickness 【mm】 Price
SH-101 φ5~φ25 Max 2 ¥7,600
SH-102 φ10~φ60 Max 4 ¥9,500

Cylindrical lens holder

■The cylindrical lens holder can fix a prismatic element such as a cylindrical lens. ■To detach and attach the element, release the left and right clamps of the upper slide and fix the slide adjustment according to the element size. Final fixation with upper element clamp after slide adjustment. ■For standard products, φ12 L = 60 stainless steel pole is equipped. ■We also support changes in pole length in the range of cataloged articles (L = 20 to 120).
Model number Element diameter 【mm】 Cover thickness 【mm】 Price
CH-101 30×25 Max 8.5 ¥8,600
CH-102 60×60 Max 12 ¥10,500

Adapter mount

■Adapter mount can be used to fix different sized elements to holder for φ30 · φ50. ■Element fixation is done by Delrin ring · screwing. ■We are also preparing for production except for φ30 · φ50. “Please contact us”
Model number Mounting diameter Element diameter φA mm Effective diameter φB mm Device thickness mm Price
ADM-30-10 φ30(M31P0.75) 10 7 Max 6 ¥3,500
ADM-30-15 φ30(M31P0.75) 15 12 Max 6 ¥3,500
ADM-30-20 φ30(M31P0.75) 20 17 Max 6 ¥3,500
ADM-30-25 φ30(M31P0.75) 25 22 Max 6 ¥3,500
ADM-30-25.4 φ30(M31P0.75) 25.4 22 Max 6 ¥3,500
ADM-50-25 φ50 25 22 Max 10 ¥4,500
ADM-50-25.4 φ50 25.4 22 Max 10 ¥4,500
ADM-50-30 φ50 30 26 Max 10 ¥4,500
ADM-50-38.1 φ50 38.1 34 Max 10 ¥4,500

Centering lens holder

■The centering type lens holder is used to fix circular elements such as lenses and mirrors. ■It is possible to center the optical axis by fine-tuning the element in the YZ axis direction. ■Fix the element with Delrin ring · screwing. ■The standard product is equipped with φ12 mm L = 60 mm pole. We also support changing the pole length in the cataloged product range (L = 20 to 120 mm).
Model number  Adaptive element diameter Element effective diameter Applied element thickness Amount of movement Price 
【φA mm】 【φB mm】 【mm】 YZ【mm】
AL-25 φ25 φ22 Max15 φ3 ¥21,000
AL-25.4 φ25.4 φ22 Max15 φ3 ¥21,000
AL-30 φ30 φ27 Max15 φ3 ¥21,000
AL-40 φ40 φ37 Max16 φ3 ¥26,000
AL-50 φ50 φ46 Max16 φ4 ¥26,000
AL-50.8 φ50.8 φ47 Max16 φ4 ¥26,000

Three-axis adjustable lens holder

■The lens holder with 3 axis adjustment is used to fix circular elements such as lens and mirror. ■It is possible to center the optical axis by fine-tuning the element in the YZ axis direction. Also, focus adjustment is possible by moving in the X axis direction. ■Fix the element with Delrin ring · screwing. ■The standard product is equipped with φ12 mm L = 60 mm pole. We also support changing the pole length in the cataloged product range (L = 20 to 120 mm). ■With TLH-30 (for φ30), adapter mounts that fix different size elements can be connected. ■Other than standard pole attached products, we also support installation fixed type. “Please contact us”
Model number Adaptive element diameter 【mm】 Amount of movement 【mm】 X Amount of movement 【mm】Y,Z Price
TLH-12.7 φ12.7 ±1.5 φ4 ¥32,000
TLH-25 φ25 ±1.5 φ4 ¥32,000
TLH-25.4 φ25.4 ±1.5 φ4 ¥32,000
TLH-30 φ30 ±1.5 φ4 ¥32,000
TLH-50 φ50 ±1.5 φ3 ¥46,000
TLH-50.8 φ50.8 ±1.5 φ3 ¥46,000

5 axis adjusted lens holder

■The 5-axis adjusted lens holder is used to fix circular elements such as lenses and mirrors. ■It is possible to center the optical axis by fine-tuning the element in the YZ axis direction. Also, focus adjustment is possible by moving in the X axis direction. ■In addition to the XYZ axes (3 axes), it is possible to adjust the tilt angle of the kinematic mechanism on the basis of the fulcrum and fine movement of the βθ axis. ■Fix the element with Delrin ring · screwing. ■The standard product is equipped with φ12 mm L = 60 mm pole. We also support changing the pole length in the cataloged product range (L = 20 to 120 mm). ■In the FLH-30 (for φ30), adapter mounts that fix different size elements can be connected. ■Other than standard pole attached products, we also support installation fixed type. “Please contact us”
Model number Adaptive element diameter 【mm】 Amount of movement 【mm】 X Amount of movement 【mm】 Y,Z Tilt angle 【°】 β,θ Price
FLH-25 φ25 ±1.5 φ4 ±2 ¥50,000
FLH-25.4 φ25.4 ±1.5 φ4 ±2 ¥50,000
FLH-30 φ30 ±1.5 φ4 ±2 ¥50,000
FLH-50 φ50 ±1.5 φ4 ±2 ¥64,000
FLH-50.8 φ50.8 ±1.5 φ4 ±2 ¥64,000

Cross holder holder · Special adapter

■The crosshair holder can adjust fine movement in the YZ axis direction orthogonal to the optical axis. ■By incorporating a cross roller guide in the moving guide and by adopting a differential micrometer head in the moving system, fine adjustment by the coarse and fine motion mechanism is excellent. ■By using a dedicated adapter, it supports a variety of connection uses such as objective lens, pinhole, air slit, FC connector, small diameter lens etc. ■The standard product is equipped with φ12 mm L = 60 mm pole. We also support changing the pole length in the cataloged product range (L = 20 to 120 mm). ■Other than standard pole attached products, we also support installation fixed type. “Please contact us”
Model number Travel Guide Movement method Price
Cross holder / ZH-101 Cross roller guide Differential micrometer head ¥46,000
Model number Adapter type Installation information Price
ZHA-1 Objective lens M20.32,P0.706mm ¥4,000
ZHA-2 φ16shape Pinhole / air slit ¥4,000
ZHA-3 FCconnector □9.5mm,4-M2Tap ¥4,000
ZHA-10 φ10 element Max T6mm ¥4,000
ZHA-12.7 φ12.7 element Max T10mm ¥4,000
ZHA-15 φ15 element Max T10mm ¥4,000
ZHA-20 φ20 element Max T12mm ¥4,000

Objective lens holder

■The objective lens holder fixes and uses the objective lens. ■It corresponds to JIS standard objective lens. ■The LB – 1 product is equipped with φ12 mm L = 60 mm pole. We also support changing the pole length in the cataloged product range (L = 20 to 120 mm). ■We also support the manufacture of holder for connection to each company lens. “Please contact us”
Model number Screw diameter 【mm】 Type Weight 【kg】 Price
LB-1 M20.32P0.706 With pole 0.08 ¥2,900
LB30-1 M20.32P0.706 Installation type 0.07 ¥5,500
PAGE TOP